UGlaze

Aliphatic Polyurethane Topcoat

UCoat It systems provide excellent chemical and abrasion resistance

UGlaze is a water based, non-yellowing aliphatic polyurethane coating system can be used to seal concrete, wood, and metal as well as a top coat over any UCoat It floor coating system. UGlaze provides an outstanding hard, high gloss finish while retaining color retention, even under ultraviolet exposure. Besides providing a hard finish, UGlaze is also very chemical resistant and won’t be affected when exposed to a wide variety of harsh chemicals, aggressive chemical based cleaners or solvents.

Shop Floor Coating Milwaukee Wisconsin

• Efficient Application

UCoat is applied directly to a wet-damp substrate to achieve permanent adhesion and reducing downtime

• Easy To Apply

An odor free, nonflammable that includes a friendly working times of near 90 minutes

• Time Efficient

A typical 575 square foot area can be coated in as a little as one day

• UV Protection

Use as a topcoat to retain color even under ultraviolet exposure

• Anti-Graffiti Coating

Use in structures such as subways, bus and railway stations, parking structures, highway retain walls and bridge structures.

• Topcoat or Standalone

UGlaze is typically used as a standalone coating over concrete or wood or as a topcoat to one of our other products such as UCoat.

System Facts

Material: Aliphatic Polyurethane Topcoat

Number of Coats: 1

Finish: Orange Peel High Gloss

Mil Thickness: 6-12 mils thick (wet)

                  Poor                   Fair                  Good                   Great

Ease of Appliation
Chemical Resistance
Durability
Decorative Qualities

Colors

Available in Clear only

Fact and SDS Sheets

Work Area with UCoat with UGlaze Floor Coating

UGlaze

Aliphatic Polyurethane Topcoat/Concrete Sealer

UGlaze is a water based, non-yellowing aliphatic polyurethane coating system can be used to seal concrete, wood, and metal as well as a top coat over any UCoat It floor coating system. UGlaze provides an outstanding hard, high gloss finish while retaining color retention, even under ultraviolet exposure. Besides providing a hard finish, UGlaze is also very chemical resistant and won’t be affected when exposed to a wide variety of harsh chemicals, aggressive chemical based cleaners or solvents.

Recommended Areas

  • Bathrooms
  • Garages
  • Walkways

System Facts

UCoat with UFlek-AF Layer Anatomy

System Build

Primer Coat – UGlaze

Intermediate Coat – UClad

Chip Broadcast – UFlek Flakes

Top Coat – UGloss-AF, UGlaze, UGlaze-SB

Number of Coats: 3

Finish: High-gloss

Mil Thickness: 16-22 mils thick (dry)

Typical Cost per Sq.Ft.: $1.46 

• Efficient Application

UCoat is applied directly to a wet-damp substrate to achieve permanent adhesion and reducing downtime

• Easy To Apply

An odor free, nonflammable that includes a friendly working times of near 90 minutes

• Time Efficient

A typical 575 square foot area can be coated in as a little as one day

Fact and SDS Sheets

System Spec Sheet

Application Instructions

System Brochure

Color Selection Sheet