UCoat with UGlaze-SB
Water based epoxy with Moisture Cure Urethane
The UCoat with UGlaze-SB is a three coat system, using water based epoxy UCoat product and then topcoated with UGlaze-SB moisture cured urethane. Some of the benefits of the UGlaze-SB as a topcoat is a single component, just pour into your mixing pail, give it a quick stir and its ready to roll, UGlaze-SB has a great chemical resistance against harsh chemicals like gas and brake fluid but great abrasion resistance along with UV stability. The overall system has a working time of around 90 minutes per coat to install at 70 degress but also is ready for light traffic in as little as 13 hours.
This system is great for garages, plane hangars, and any medium traffic area. This system is not recommended for interior areas like basements, in use areas like showrooms, office areas and other areas with low ventilation and exposure a flame source.
• Easy to Apply
Apply the UCoat Bond coat to a damp-wet surface and the topcoat is one component, pour into a mixing pail, quick stir and coat. Also provide s long working times.
• UV Stability
UCoat with UGaze-SB is UV stable allowing for outdoor use for patios, walkways and more.
UCoat with UGlaze-SB System Facts
Material: Water Based bond coat and base coat, a moisture cured urethane topcoat
Number of Coats: 3
Finish: High Gloss
Mil Thickness: 7-12 mils thick (dry)
Poor Fair Good Great
Ease of Appliation
Chemical Resistance
Durability
Decorative Qualities
Colors
Base Colors
Flake Combinations
