Waterbased Epoxy Floor Coating System
The UCoat system is a two coat, water based epoxy floor coating that exhibits excellent characteristics that rival any solvent based product. Being industrial quality, UCoat water based epoxy is chemical resistant against oil, gas and brake fluid while offering excellent abrasion resistance. Since UCoat is water based, it has very little odor, is non-flammable and is easy to clean making it a go-to product for virtually any concrete or wood substrate.
UCoat water based epoxy is easy to install. The first coat is applied to a cleaned and prepared substrate when the substrate is wet-damp with no standing puddles. This will allow for maximum penetration into the substrate to achieve permanent adhesion. Then, in as little as 4 to 6 hours later, apply the second coat and your UCoat system is complete.
UCoat is applied directly to a wet-damp substrate to achieve permanent adhesion and reducing downtime
An odor free, nonflammable that includes a friendly working times of near 90 minutes
A typical 575 square foot area can be coated in as a little as one day
UCoat Bond Coat
UCoat Finish Coat
Material: Water Based Epoxy
Number of Coats: 2
Mil Thickness: 4-6 mils thick (dry)
Poor Fair Good Great
Fact and SDS Sheets
System Spec Sheet
Color Selection Sheet