Waterbased Polyurethane
UGlaze is a water based two component, uv stable, non-yellowing, aliphatic polyurethane coating. UGlaze provides excellent chemical and abrasion resistance, while providing anti-microbial properties making it suitable for food service areas. Also can be used as an anti-graffiti coating for use in such structures as subways, bus and railway stations, parking structures, highway retaining walls and bridge structures, schools, hotels, airports and building facades. UGlaze is typically used as a standalone coating over concrete or wood or as a topcoat.
Application Information
2:1
1-3 Hours @ 68°
8-12 Hours @ 68°
18-24 Hours @ 68°
3-5 Days @68°
300-400 square feet per gallon @ 3-5 mils
Application Steps
UGlaze has a mix ratio of 2 parts B(Base) to 1 part A(Activator). Product packaging is pre-measured and should be mixed as supplied. After the two parts are combined, mix well with a paint paddle until the material is thoroughly mixed and streak free. Avoid whipping air into the coating. Improper mixing may result in product failure.
Used as a concrete sealer no primer is required.
UGlaze is applied with a 3/8″ nap roller cover (included in the UGlaze Kit). Use squeegee to spread the UClad and back roll with a 3/8″ nap roller to even out the coating. Use a paint roller to spread UGlaze in an even M&W pattern. Maintain temperatures within the recommended ranges during the application and curing process. Apply material with relative humidity within the parameters shown on the technical data.
If you recoat or topcoat this product, you must first be sure that the coating has tacked off before recoating. However, if you exceed full cure time previous coat should be deglossed to insure a trouble free bond prior to application of recoats or topcoats. Always remember that colder temperatures will require more cure time for the product before recoating or topcoating can commence.
Packaging
Coverage:
450-600 Square feet @ 3-5 mils
Size:
1.5 Gallon Unit
Includes:
Kit includes UGlaze Waterbased Urethane, applicator tools, mixing pail and instructions
Coverage:
450-600 Square feet @ 3-5 mills
Size:
1.5 Gallon Unit
Includes:
Double pack includes UGlaze Waterbased Urethane
Coverage:
225-300 Square feet @ 3-5 mils
Size:
.75 Gallon Unit
Includes:
Single pack includes UClad epoxy (choice of color)
Coverage:
4,500-6,000 Square feet @ 3-5 mils
Size:
15 Gallon Unit
Includes:
Contractor pack includes UGlaze Waterbased Urethane
Colors
Available in Clear Only
Fact and SDS Sheets
All Images and content of this site copyright ©2024 UCI NA, LLC. All rights reserved.
UCI NA, LLC is a privately owned company based in Royal Oak, MI, USA. All registered product names are exclusive property of UCI NA, LLC and may not be reproduced. This site is maintained by UCoat It. For sales or technical support call 1-800-826-2848.