The UCoat with UGlaze-SB is a low-cost system that provides chemical and abrasion resistance to areas like garages, light warehousing and other light to medium traffic areas.  This system combines a  primer and finish coat of  water based epoxy with a moisture cure urethane to give a gloss finish.

The Finitezza system is a high build multi coat floor coating composed of a bond coat of UCoat, UClad intermediate coat with an optional broadcast of UFlek flakes and a top coat. This system provides a high wear finish and high gloss look, plus the high build fills helps fill imperfections.

UCoat is easy to install. The first coat is applied to a cleaned and prepared substrate when the substrate is wet-damp with no standing puddles. This will allow for maximum penetration into the substrate to achieve permanent adhesion. Then, in as little as 4 to 6 hours later, apply the second coat and your UCoat system is complete. test

The UCoat with UGloss system is ideal system for areas with low ventilation as the system has little to no offensive odor and is also nonflammable meaning it can be used virtually anywhere.

Features of this system include flexibility of 1/8” mandrel, chemical and abrasion resistance and a high gloss finish making it a great system for medium to high traffic areas.  The UGloss-AF top coat is available in a solid color finish or a clear finish allowing for floor graphics, striping or decorative flakes.

UGlaze provides an outstanding hard, high gloss finish while retaining color retention, even under ultraviolet exposure. Besides providing a hard finish, UGlaze is also very chemical resistant and won’t be affected when exposed to a wide variety of harsh chemicals, aggressive chemical based cleaners or solvents.

This system allows you to incorporate multiple metallic pigments into the same floor leaving you with endless creative possibilities. Optional water-based or solvent based top coats can be used allowing for application in a wide variety of areas.

This system creates a simulated terrazzo finish that will hide most substrate imperfections and provides great chemical and abrasion resistance. This system is available in various UFlek flakes sizes to create the look you desire.

This application is a great way to incorporate our highly decorative, mesmerizing metallic pigments into high traffic spaces that require highly durable finishes. UGlaze-SB provides exceptional chemical & abrasion resistance, as well as UV stability making it ideal for a wide variety of applications.

This metallic epoxy system provides a beautiful pearlescent, high-gloss, modern looking finish to just about any surface. UGloss water-based top coat provides an incredibly easy-to-clean, commercial-grade finish, making it ideal for a wide variety of installations.

This system can be built up (12-16 mils thick when dry) with multiple coats to increase film thickness and to fill voids in substrate. This system when used outdoors should be top coated with one of our top coats as over time it will yellow due to low UV resistance and become brittle like other epoxies.

This system is ideal for areas like offices, locker rooms and basements as it is odor free, non-flammable and dries quickly to reduce downtime. The UCoat with UFlek system provides a semi-gloss to high gloss finish and with the UFlek flakes creates a terrazzo like finish camouflaging most imperfections in the substrate.