The UClad-LV system is a two coat system featuring one of our water based epoxy primers and UClad-LV high build epoxy coating. The UClad-LV system is a 100% solids coating providing a high gloss finish and excellent abrasion and chemical resistance. This system can be built up (12-16 mils thick when dry) with multiple coats to increase film thickness and to fill voids in substrate. This system when used outdoors should be top coated with one of our top coats as over time it will yellow due to low UV resistance and become brittle like other epoxies.
Starting At $489.90 per Kit
(82¢ per sq.ft.)
UClad-LV provides excellent abrasion resistance plus great protection against oil, gas, hydraulic fluid and more
A simple two coat system providing a quick turnaround time, ready for use in as little as 12 hours
This 100% solids high build epoxy was developed for high traffic areas like manufacturing
Material: Water Based Epoxy with Low Viscosity High Build Epoxy
Number of Coats: 2
Finish: High Gloss
Mil Thickness: 12-16 mils thick (dry)
Poor Fair Good Great
The UClad-LV system is a two coat system featuring one of our water based epoxy primers and UClad-LV high build epoxy coating. The UClad-LV system is a 100% solids coating providing a high gloss finish and excellent abrasion and chemical resistance.
Starting Price
82¢ per sq.ft.
$489.90 per kit (600 sq.ft.)
Mil Thickness
12-16 mils
Bond Coat:
UPrime-MCP
A medium cure polyurea that provides a base for applying decorative flake and adds a high build film that fills in imperfections and small cracks.
Top Coat:
A polyaspartic top coat that provides a chemical and abrasion resistance along with uv stability. UGlaze-84 has a high gloss finish and is great for sealing flakes.
Yes, Enfiniti 100 is uv stable making it great for outdoor use around swimming pools, patios and porches.
Our UFlek decorative flakes are an option. We have a wide variety of combination and colors to choose from.
A polyurea is an elastic rubber like coating that provides that provides durability and flexibility.
Polyaspartics is a form of a polyurea that features uv stability, low V.O.C’s, gloss finish and provides a fast cure time.
Square footage for the Enfiniti 100 may vary. Typical coverage for the UPrime-MCP Polyurea base coat is between 100-200 square feet per gallon. The typical coverage for the UGlaze-84 Polyaspartic top coat is between 150 and 300 square feet per gallon.
Reach out to talk about your application, request samples, or get a quote.
All Images and content of this site copyright ©2025 UCI NA, LLC. All rights reserved.
UCI NA, LLC is a privately owned company based in Royal Oak, MI, USA. All registered product names are exclusive property of UCI NA, LLC and may not be reproduced. This site is maintained by UCoat It. For sales or technical support call 1-800-826-2848.
