UGlaze-HB
Waterbased Polyurethane
Application Information
Application Steps
Packaging
Color Chart
Data Sheets
UGlaze is a water based two component, uv stable, non-yellowing, aliphatic polyurethane coating. UGlaze provides excellent chemical and abrasion resistance, while providing anti-microbial properties making it suitable for food service areas. Also can be used as an anti-graffiti coating for use in such structures as subways, bus and railway stations, parking structures, highway retaining walls and bridge structures, schools, hotels, airports and building facades. UGlaze is typically used as a standalone coating over concrete or wood or as a topcoat.
Advantages:
- Non Flammable/Low Odor
- Food Grade Coating
- Standalone Coating
- Good Chemical Resistance
- Great Abrasion Resistance
Application Information
Mixing Ratio
2:1
Pot Life
1-3 Hours @ 68°
Recoat Time
8-12 Hours @ 68°
Light Traffic
18-24 Hours @ 68°
Full Cure
3-5 Days @68°
Coverage
300-400 square feet per gallon @ 3-5 mils
Application Steps
Mixing
UGlaze has a mix ratio of 2 parts B(Base) to 1 part A(Activator). Product packaging is pre-measured and should be mixed as supplied. After the two parts are combined, mix well with a paint paddle until the material is thoroughly mixed and streak free. Avoid whipping air into the coating. Improper mixing may result in product failure.
Priming
Used as a concrete sealer no primer is required.
Application
UGlaze is applied with a 3/8″ nap roller cover (included in the UGlaze Kit). Use squeegee to spread the UClad and back roll with a 3/8″ nap roller to even out the coating. Use a paint roller to spread UGlaze in an even M&W pattern. Maintain temperatures within the recommended ranges during the application and curing process. Apply material with relative humidity within the parameters shown on the technical data.
Recoating
If you recoat or topcoat this product, you must first be sure that the coating has tacked off before recoating. However, if you exceed full cure time previous coat should be deglossed to insure a trouble free bond prior to application of recoats or topcoats. Always remember that colder temperatures will require more cure time for the product before recoating or topcoating can commence.
Packaging
UGlaze Kit
Coverage:
450-600 Square feet @ 3-5 mils
Size:
1.5 Gallon Unit
Includes:
Kit includes UGlaze Waterbased Urethane, applicator tools, mixing pail and instructions
UGlaze Double Pack
Coverage:
450-600 Square feet @ 3-5 mills
Size:
1.5 Gallon Unit
Includes:
Double pack includes UGlaze Waterbased Urethane
UGlaze Single Pack
Coverage:
225-300 Square feet @ 3-5 mils
Size:
.75 Gallon Unit
Includes:
Single pack includes UClad epoxy (choice of color)
UGlaze Contractor Pack
Coverage:
4,500-6,000 Square feet @ 3-5 mils
Size:
15 Gallon Unit
Includes:
Contractor pack includes UGlaze Waterbased Urethane
Colors
Available in Clear Only
Fact and SDS Sheets