UCoat
Water Based Epoxy
UCoat Waterbased Epoxy System Facts
UCoat Bond Coat
UCoat Finish Coat
Material: Water Based Epoxy
Number of Coats: 2
Finish: Satin/Semi-Gloss
Mil Thickness: 4-6 mils thick (dry)
Required Products
System Sheet
Color Chart
Build & Buy
Pricing
Kit – $249.95
• Two Gallon Primer/ Finish coat
• Includes material, applicator tools and mixing pail.
• Typical coverage is 400-576 sq.ft.
5 Gallon -$584.85
• Material only
• Typical coverage is 2,000-2,576 sq.ft.
2 Gallon -$229.95
• Two Gallon Primer/ Finish coat
• Material only
• Typical coverage is 400-576 sq.ft.
1 Gallon – $124.95
• Material only.
• Typical coverage is 200-288 sq.ft.
*Call 800-826-2848 for volume pricing
Advantages of the UCoat system
The UCoat system offer several advantages to allow for an easy to install application.
Advanced Primer Technology
UCoat is applied directly to a wet-damp substrate to achieve permanent adhesion and reducing downtime
Easy To Apply
An odor free, nonflammable that includes a friendly working times of near 90 minutes
One Day Application
A typical 575 square foot area can be coated in as a little as one day
Available UCoat Options
When choosing your UCoat floor, we offer several special finishes to out fit your area.
FAQ’s
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
The UCoat system is a two coat, water based epoxy floor coating that exhibits excellent characteristics that rival any solvent based product. Being industrial quality, UCoat water based epoxy is chemical resistant against oil, gas and brake fluid while offering excellent abrasion resistance. Since UCoat is water based, it has very little odor, is non-flammable and is easy to clean making it a go-to product for virtually any concrete or wood substrate.
UCoat water based epoxy is easy to install. The first coat is applied to a cleaned and prepared substrate when the substrate is wet-damp with no standing puddles. This will allow for maximum penetration into the substrate to achieve permanent adhesion. Then, in as little as 4 to 6 hours later, apply the second coat and your UCoat system is complete.