UCoat® with UGloss® High Gloss Urethane Top Coat

WATERBASED TOPCOAT: The following information pertains to interior and/or basement areas only. If you are coating a garage, exterior, or other area that requires optimal chemical, abrasion and/or UV resistance, click here.

All UCoat It floor coating finishes begin with application of UCoat water-based epoxy. This system uses UCoat epoxy as a bonding base with the added benefit of our UGloss (waterbased) urethane topcoat.

What is UGloss?

UGloss is a water-based urethane top coat specially formulated for use with UCoat epoxy. Since it is water-based, there is virtually no odor allowing for comfortable application in interiors, basements and other enclosed areas. Adding UGloss to your UCoat base will enhance the chemical resistance and durability of your floor, while creating a high-gloss finish.

Why add a UGloss topcoat?

UGloss is ideal for use in interior areas where vapors or odors are undesirable. The urethane formula also increases the thickness of floor while creating a buffer zone for traffic wear and surface abrasions.

How is UGloss applied?

UGloss may be applied to any properly finished UCoat floor. Best applied within 36 hours of your epoxy base, the UGloss is applied with roller and brush directly to the UCoat material adding a protective layer of durable urethane. The UGloss topcoat will take approximately 2-3 hrs (at 68°F) to become tack-free and may be applied in multiple coats. Your new floor will be ready for foot traffic in as little as 24 hours.

How is UGloss supplied?

UGloss (waterbased) topcoat is available in do-it yourself kits starting at $169.95 for up to a 24’ x 24’ area (576 sq.ft.) of smooth concrete*. Material-only extender packs are available for larger areas.

NOTE: UGloss is a topcoat only and requires additional purchase, or previous application, of a UCoat epoxy base.